Report Files with 133 Byte Records
|
Data File Compare Report Files with 133 Byte Records |
|
| The SimoTime Home Page |
Introduction
The 1st section Primary Functions of this document will focus on doing an actual compare of two sequential files containing report information is a print-oriented format. The 2nd section Secondary Functions will focus on the preparation tasks required prior to doing file compare. The 3rd section Ancillary Functions will describe some of the supporting tasks (such as creating test files) that are required.
This example will use IEBGENER or the Windows "echo" function to create the sequential files to be used for testing. The files will be used to demonstrate the capabilities of the data file compare processes and some of the requirements that are unique to print-oriented files. The first two files contain the same record content and produce an equal compare result. A third file has a record with different content and the compare process will identify the difference.
This example includes JCL Members, Windows CMD Files and COBOL programs. In the world of programming there are many ways to solve a problem. This suite of programs is provided as one of the many possible solutions for comparing data files. The files used in this suite of sample programs use fixed length records of eighty-bytes. When the files are compared and if a difference is found the COBOL compare program will call SIMOHEX4.CBL and SIMOLOGS.CBL. These programs and their associated copy files are part of the SIMOLIBR package. Refer to the Downloads and Links to Similar Pages section of this document for additional information.
Many companies are looking for ways to compare data files using a mainframe system and a distributed system (i.e. Linux, UNIX and/or Windows or "LUW") running Micro Focus sub-systems. This utility program (UTCOMPRT) is intended to assist in these efforts. The UTCOMPRT program runs in the Windows environment and generates comparison programs (COBOL Source Code) that may be compiled and executed on a distributed LUW platform with Micro Focus.
We have made a significant effort to ensure the documents and software technologies are correct and accurate. We reserve the right to make changes without notice at any time. The function delivered in this version is based upon the enhancement requests from a specific group of users. The intent is to provide changes as the need arises and in a timeframe that is dependent upon the availability of resources.
Copyright © 1987-2025
SimoTime Technologies and Services
All Rights Reserved
Primary Functions
This section will focus on the items (process and procedures) that do the actual data file comparison. A second group of items will be used to generate the comparison program and prepare the environment for the compare tasks. These secondary command files and programs will be described in the Secondary Functions section of this document.
The file compare processes will use a set of data files that have a report-oriented structure. The test files contain two record types. The first record type contains page header information with a date and time stamp. The second record type contains user information.
JCL Members for Data File Compare
This section will focus on the JCL Members that execute the file compare processes. The first JCL Member will compare two files that are logically identical. The second JCL Member will compare two files that have a difference embedded within the files. The Data File Compare program will find the difference and produce a NOT-Equal result. The third JCL Member will compare two files that have different record counts. The Data File Compare program will identify the difference and produce a NOT-Equal result with record counts.
EQ Compare Results
This JCL Member (R133BPJ1.jcl) will compare two sequential files that are identical. The job execution will result in a zero return code and display the record counts to the SYSOUT device.
//R133BPJ1 JOB (SIMOTIME),'DATA FILE COMPARE',CLASS=1,MSGCLASS=0, // NOTIFY=CSIP1 //* ******************************************************************* //* R133BPJ1.JCL - a JCL Member for Batch Job Processing * //* This JCL Member is provided by SimoTime Technologies * //* (C) Copyright 1987-2019 All Rights Reserved * //* Web Site URL: http://www.simotime.com * //* e-mail: helpdesk@simotime.com * //* ******************************************************************* //* //* Text - Compare two data files. //* Author - SimoTime Technologies //* Date - January 24, 1996 //* //* This set of programs will run on a mainframe under MVS or on a //* Personal Computer with Windows and Micro Focus Technologies. //* //* ************ //* * R133BPJ1 * //* ********jcl* //* * //* ************ ************ ************ //* * REPORT01 *-----* R133BPC1 *-----* SYSOUT * //* ********dat* * ********cbl* * ************ //* * * * //* ************ * * * ************ //* * REPORT02 *--* * *--* SYSLOG * //* ********dat* * *******vseq* //* * //* ************ //* * EOJ * //* ************ //* //* ******************************************************************* //* Step 1 of 1, Compare two data files, expect an EQUAL result... //* //COMPARE1 EXEC PGM=R133BPC1 //STEPLIB DD DSN=SIMOTIME.PDS.LOADLIB,DISP=SHR //REPORT01 DD DSN=SIMOTIME.DATA.RPT133D1,DISP=SHR //REPORT02 DD DSN=SIMOTIME.DATA.RPT133D2,DISP=SHR //SYSLOG DD DSN=SIMOTIME.SYSLOG.COMPARE,DISP=SHR //SYSOUT DD SYSOUT=* //
NE Results based on Record Content
This JCL Member (R133BPJ2.jcl) will compare two files that have a difference embedded within the files. The Data File Compare programs will find the difference and produce a NOT-Equal result. The record counts and the difference will be displayed to the SYSOUT device.
//R133BPJ2 JOB (SIMOTIME),'DATA FILE COMPARE',CLASS=1,MSGCLASS=0, // NOTIFY=CSIP1 //* ******************************************************************* //* R133BPJ2.JCL - a JCL Member for Batch Job Processing * //* This JCL Member is provided by SimoTime Technologies * //* (C) Copyright 1987-2019 All Rights Reserved * //* Web Site URL: http://www.simotime.com * //* e-mail: helpdesk@simotime.com * //* ******************************************************************* //* //* Text - Compare two data files. //* Author - SimoTime Technologies //* Date - January 24, 1996 //* //* This set of programs will run on a mainframe under MVS or on a //* Personal Computer with Windows and Micro Focus Technologies. //* //* ************ //* * R133BPJ2 * //* ********jcl* //* * //* ************ ************ ************ //* * REPORT01 *-----* R133BPC1 *-----* SYSOUT * //* ********dat* * ********cbl* * ************ //* * * * //* ************ * * * ************ //* * REPORT02 *--* * *--* SYSLOG * //* ********dat* * *******vseq* //* * //* ************ //* * EOJ * //* ************ //* //* ******************************************************************* //* Step 1 of 1, Compare two data files, expect an EQUAL result... //* //COMPARE1 EXEC PGM=R133BPC1 //STEPLIB DD DSN=SIMOTIME.PDS.LOADLIB,DISP=SHR //REPORT01 DD DSN=SIMOTIME.DATA.RPT133D1,DISP=SHR //REPORT02 DD DSN=SIMOTIME.DATA.RPT133D4,DISP=SHR //SYSLOG DD DSN=SIMOTIME.SYSLOG.COMPARE,DISP=SHR //SYSOUT DD SYSOUT=* //
NE Results based on File Truncation
This JCL Member File (R133BPJ3.jcl) will compare two sequential files that have different record counts. The Data File Compare program will identify the difference in record counts and produce a NOT-Equal or non-Zero result. The record counts and the difference will be displayed to the SYSOUT device.
//R133BPJ3 JOB (SIMOTIME),'DATA FILE COMPARE',CLASS=1,MSGCLASS=0, // NOTIFY=CSIP1 //* ******************************************************************* //* R133BPJ3.JCL - a JCL Member for Batch Job Processing * //* This JCL Member is provided by SimoTime Technologies * //* (C) Copyright 1987-2019 All Rights Reserved * //* Web Site URL: http://www.simotime.com * //* e-mail: helpdesk@simotime.com * //* ******************************************************************* //* //* Text - Compare two data files. //* Author - SimoTime Technologies //* Date - January 24, 1996 //* //* This set of programs will run on a mainframe under MVS or on a //* Personal Computer with Windows and Micro Focus Technologies. //* //* ************ //* * R133BPJ3 * //* ********jcl* //* * //* ************ ************ ************ //* * REPORT01 *-----* R133BPC1 *-----* SYSOUT * //* ********dat* * ********cbl* * ************ //* * * * //* ************ * * * ************ //* * REPORT02 *--* * *--* SYSLOG * //* ********dat* * *******vseq* //* * //* ************ //* * EOJ * //* ************ //* //* ******************************************************************* //* Step 1 of 1, Compare two data files, expect an EQUAL result... //* //COMPARE1 EXEC PGM=R133BPC1 //STEPLIB DD DSN=SIMOTIME.PDS.LOADLIB,DISP=SHR //REPORT01 DD DSN=SIMOTIME.DATA.RPT133D1,DISP=SHR //REPORT02 DD DSN=SIMOTIME.DATA.RPT133D3,DISP=SHR //SYSLOG DD DSN=SIMOTIME.SYSLOG.COMPARE,DISP=SHR //SYSOUT DD SYSOUT=* //
CMD Files for Data File Compare
This section will focus on three CMD Files that execute a simple file compare process. The first CMD File will compare to files that are logically identical. The second CMD File will compare two files that have a difference embedded within the files. The Data File Compare program will find the difference and produce a NOT-Equal result. The third CMD File will compare two files that have different record counts. The Data File Compare program will identify the difference and produce a NOT-Equal result with record counts.
EQ Compare Results
This CMD File (R133BPW1.cmd) will compare two sequential files. The user data is identical. The date and time stamps in the header records are not equal in value. The compare program uses the OMIT/Bypass functions to bypass comparing the header records. The job execution will result in a zero return code and display the record counts to the SYSOUT device.
@echo OFF
rem * *******************************************************************
rem * R133BPW1.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Compare two sequential files
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * This set of programs will compare two record sequential (RSEQ)
rem * files using the conditional bypass of records to be compared.
rem * The RSEQ files are identical.
rem * Therefore, an Equal status will be posted with a normal EOJ.
rem *
rem * ************
rem * * R133BPW1 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************ ************
rem * * RPT133D1 *-----* R133BPC1 *-----* SYSLOG *
rem * *******rseq* * ********cbl* ************
rem * * *
rem * ************ * *
rem * * RPT133D2 *--* *
rem * *******rseq* *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * *******************************************************************
rem * Step 1 Delete any previously created file...
rem *
set CmdName=R133BPW1
call ..\Env1BASE %CmdName%
set JobStatus=0000
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
:PrepareQSAM
call SimoNOTE "StepInfo Prepare the File Name Mapping"
set REPORT01=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D1.DAT
set REPORT02=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D2.DAT
call SimoNOTE "SYSUT1 is %REPORT01%"
call SimoNOTE "SYSUT2 is %REPORT02%"
rem *
rem * *******************************************************************
rem * Step 2 Compare the two files...
rem *
:ExecuteCompareRoutine
call SimoNOTE "StepInfo Execute the Compare Program"
run R133BPC1
if not "%ERRORLEVEL%" == "0" set JobStatus=0010
if not %JobStatus% == 0000 goto :EojNok
call SimoNOTE "Compare-One is %REPORT01%"
call SimoNOTE "Compare-Two is %REPORT02%"
rem *
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished JobName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING JobName %CmdName%, Job Status is %JobStatus%"
:End
if not "SIMOGENS" == "BATCH" call SYSLOGW1
if not "SIMOGENS" == "BATCH" pause
NE Results based on Record Content
This CMD File (R133BPW2.cmd) will compare two sequential files that have a difference embedded within the files. The Data File Compare program will find the difference and produce a NOT-Equal or non-Zero result. The record counts and the difference will be displayed to the SYSOUT device.
@echo OFF
rem * *******************************************************************
rem * R133BPW2.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Compare two sequential files
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * This set of programs will compare two record sequential (RSEQ)
rem * files using the conditional bypass of records to be compared.
rem * One of the record sets in the RSEQ files is different.
rem * Therefore, a NOT-Equal status will be posted with an ABEND.
rem *
rem * ************
rem * * R133BPW2 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************ ************
rem * * RPT133D1 *-----* R133BPC1 *-----* SYSLOG *
rem * *******rseq* * ********cbl* ************
rem * * *
rem * ************ * *
rem * * RPT133D2 *--* *
rem * *******rseq* *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * *******************************************************************
rem * Step 1 Delete any previously created file...
rem *
set CmdName=R133BPW2
call ..\Env1BASE %CmdName%
set JobStatus=0000
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
:PrepareQSAM
call SimoNOTE "StepInfo Prepare the File Name Mapping"
set REPORT01=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D1.DAT
set REPORT02=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D4.DAT
call SimoNOTE "SYSUT1 is %REPORT01%"
call SimoNOTE "SYSUT2 is %REPORT02%"
rem *
rem * *******************************************************************
rem * Step 2 Compare the two files...
rem *
:ExecuteCompareRoutine
call SimoNOTE "StepInfo Execute the Compare Program"
run R133BPC1
if not "%ERRORLEVEL%" == "0" set JobStatus=0010
if not %JobStatus% == 0000 goto :EojNok
call SimoNOTE "Compare-One is %REPORT01%"
call SimoNOTE "Compare-Two is %REPORT02%"
rem *
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished JobName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING JobName %CmdName%, Job Status is %JobStatus%"
:End
if not "SIMOGENS" == "BATCH" call SYSLOGW1
if not "SIMOGENS" == "BATCH" pause
NE Results based on File Truncation
This CMD File (R133BPW3.cmd) will compare two sequential files that have different record counts. The Data File Compare program will identify the difference in record counts and produce a NOT-Equal or non-Zero result. The record counts and the difference will be displayed to the SYSOUT device.
@echo OFF
rem * *******************************************************************
rem * R133BPW3.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Compare two sequential files
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * This set of programs will compare two record sequential (RSEQ)
rem * files using the conditional bypass of records to be compared.
rem * One of the RSEQ files is truncated (i.e. contains fewer records).
rem * Therefore, a NOT-Equal status will be posted with an ABEND.
rem *
rem * ************
rem * * R133BPW3 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************ ************
rem * * REPORT01 *--*--* R133BPC1 *--*--* SYSLOG *
rem * *******rseq* * ********cbl* * ************
rem * * * *
rem * ************ * * * ************
rem * * REPORT02 *--* * *--* SYSOUT *
rem * *******rseq* * ************
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * *******************************************************************
rem * Step 1 Delete any previously created file...
rem *
set CmdName=R133BPW3
call ..\Env1BASE %CmdName%
set JobStatus=0000
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
:PrepareQSAM
call SimoNOTE "StepInfo Prepare the File Name Mapping"
set REPORT01=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D1.DAT
set REPORT02=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D3.DAT
call SimoNOTE "SYSUT1 is %REPORT01%"
call SimoNOTE "SYSUT2 is %REPORT02%"
rem *
rem * *******************************************************************
rem * Step 2 Compare the two files...
rem *
:ExecuteCompareRoutine
call SimoNOTE "StepInfo Execute the Compare Program"
run R133BPC1
if not "%ERRORLEVEL%" == "0" set JobStatus=0010
if not %JobStatus% == 0000 goto :EojNok
call SimoNOTE "Compare-One is %REPORT01%"
call SimoNOTE "Compare-Two is %REPORT02%"
rem *
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished JobName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING JobName %CmdName%, Job Status is %JobStatus%"
:End
if not "SIMOGENS" == "BATCH" call SYSLOGW1
if not "SIMOGENS" == "BATCH" pause
COBOL Program for Data File Compare
The following COBOL program (CPR133C1.cbl) is used to compare two record sequential files (RSEQ) containing 133-byte, fixed length records.
IDENTIFICATION DIVISION.
PROGRAM-ID. R133BPC1.
AUTHOR. SIMOTIME TECHNOLOGIES.
*****************************************************************
* This program was generated by SimoZAPS *
* A product of SimoTime Technologies *
* Our e-mail address is: helpdesk@simotime.com *
* Also, visit our Web Site at http://www.simotime.com *
* *
* Generation Date: 2020-06-25 Generation Time: 19:20:46:27 *
* *
* Record Record Key *
* Function Name Organization Format Max-Min Pos-Len *
* PRIMARY REPORT01 SEQUENTIAL FIXED 00133 *
* *
* SECONDARY REPORT02 SEQUENTIAL FIXED 00133 *
* *
*****************************************************************
ENVIRONMENT DIVISION.
INPUT-OUTPUT SECTION.
FILE-CONTROL.
SELECT REPORT01-FILE ASSIGN TO REPORT01
ORGANIZATION IS SEQUENTIAL
ACCESS MODE IS SEQUENTIAL
FILE STATUS IS REPORT01-STATUS.
SELECT REPORT02-FILE ASSIGN TO REPORT02
ORGANIZATION IS SEQUENTIAL
ACCESS MODE IS SEQUENTIAL
FILE STATUS IS REPORT02-STATUS.
*****************************************************************
DATA DIVISION.
FILE SECTION.
FD REPORT01-FILE
DATA RECORD IS REPORT01-REC
.
01 REPORT01-REC.
05 REPORT01-DATA-01 PIC X(00133).
FD REPORT02-FILE
DATA RECORD IS REPORT02-REC
.
01 REPORT02-REC.
05 REPORT02-DATA-01 PIC X(00133).
*****************************************************************
* This program was created using the SYSCOMP1.txt file as the *
* template for the data file comparison. The positions to be *
* compared are determined at compile time. *
* *
* For more information or questions please contact SimoTime *
* Technologies. The version control number is 20.00.00 *
* *
* Our e-mail address is: helpdesk@simotime.com *
* Also, visit our Web Site at http://www.simotime.com *
*****************************************************************
WORKING-STORAGE SECTION.
01 SIM-TITLE.
05 T1 pic X(11) value '* R133BPC1 '.
05 T2 pic X(34) value 'Compare-133, 2-133 and OMIT-Bypass'.
05 T3 pic X(10) value ' v20.00.00'.
05 T4 pic X(24) value ' helpdesk@simotime.com'.
01 SIM-COPYRIGHT.
05 C1 pic X(11) value '* R133BPC1 '.
05 C2 pic X(32) value 'This Data File Compare Member wa'.
05 C3 pic X(32) value 's generated by SimoTime Technolo'.
05 C4 pic X(04) value 'gies'.
01 SIM-THANKS-01.
05 C1 pic X(11) value '* R133BPC1 '.
05 C2 pic X(32) value 'A Data File Compare Program gene'.
05 C3 pic X(32) value 'rated by using SimoTime Technolo'.
05 C4 pic X(04) value 'gies'.
01 SIM-THANKS-02.
05 C1 pic X(11) value '* R133BPC1 '.
05 C2 pic X(32) value 'Please send all comments or sugg'.
05 C3 pic X(32) value 'estions to the helpdesk@simotime'.
05 C4 pic X(04) value '.com'.
01 REPORT01-STATUS.
05 REPORT01-STATUS-L pic X.
05 REPORT01-STATUS-R pic X.
01 REPORT01-EOF pic X value 'N'.
01 REPORT01-OPEN-FLAG pic X value 'C'.
01 REPORT01-LRECL pic 9(5) value 00133.
01 REPORT02-STATUS.
05 REPORT02-STATUS-L pic X.
05 REPORT02-STATUS-R pic X.
01 REPORT02-EOF pic X value 'N'.
01 REPORT02-OPEN-FLAG pic X value 'C'.
01 REPORT02-LRECL pic 9(5) value 00133.
*****************************************************************
* The following buffers are used to create a four-byte status *
* code that may be displayed. *
*****************************************************************
01 IO-STATUS.
05 IO-STAT1 pic X.
05 IO-STAT2 pic X.
01 IO-STATUS-04.
05 IO-STATUS-0401 pic 9 value 0.
05 IO-STATUS-0403 pic 999 value 0.
01 TWO-BYTES-BINARY pic 9(4) BINARY.
01 TWO-BYTES-ALPHA redefines TWO-BYTES-BINARY.
05 TWO-BYTES-LEFT pic X.
05 TWO-BYTES-RIGHT pic X.
*****************************************************************
* Message Buffer used by the Z-DISPLAY-MESSAGE-TEXT routine. *
*****************************************************************
01 MESSAGE-BUFFER.
05 MESSAGE-HEADER pic X(11) value '* R133BPC1 '.
05 MESSAGE-TEXT.
10 MESSAGE-TEXT-1 pic X(68) value SPACES.
10 MESSAGE-TEXT-2 pic X(188) value SPACES.
*****************************************************************
01 APPL-RESULT pic S9(9) comp.
88 APPL-AOK value 0.
88 APPL-EOF value 16.
01 KEY-ACTIVE pic X value 'Y'.
01 KEY-CONTROL-1.
05 K-PS-1 pic 9(5) value 00000.
05 K-LN-1 pic 9(5) value 00000.
01 KEY-CONTROL-2.
05 K-PS-2 pic 9(5) value 00000.
05 K-LN-2 pic 9(5) value 00000.
01 KEYRECID-ACTIVE pic X value 'N'.
01 KEYRECID-CONTROL-1.
05 E-PS-1 pic 9(5) value 00000.
05 E-LN-1 pic 9(5) value 00000.
01 KEYRECID-CONTROL-2.
05 E-PS-2 pic 9(5) value 00000.
05 E-LN-2 pic 9(5) value 00000.
01 READ-FLAGS.
05 READ-1 pic X value 'Y'.
05 READ-2 pic X value 'Y'.
01 DUMP-FLAGS.
05 DUMP-RPI pic X value 'Y'.
05 DUMP-ASC pic X value 'Y'.
05 DUMP-EBC pic X value 'Y'.
05 DUMP-HEX pic X value 'Y'.
05 DUMP-DET-GRP.
10 DUMP-DET pic X value 'Y'.
10 DUMP-DET-2 pic XX value 'NE'.
05 DUMP-SUM pic X value 'Y'.
05 DUMP-STATUS pic x VALUE 'Y'.
01 DUMP-PGM pic X(8) value 'ENABLED '.
01 DPOS-UT1 pic 9(5) value 1.
01 DLEN-UT1 pic 9(5) value 00000.
01 DPOS-UT2 pic 9(5) value 1.
01 DLEN-UT2 pic 9(5) value 00000.
01 FUNCTION-FLAGS.
05 FF-01 pic X value '1'.
05 FF-02 pic X value '0'.
05 FF-03 pic X value '1'.
01 COMPACT-STATUS pic XX value 'EQ'.
01 COMPACT-PENDED pic XX value 'EQ'.
01 COMPARE-STATUS pic XX value 'EQ'.
01 FLAG-EQ pic XX value 'EQ'.
01 FLAG-NE pic XX value 'NE'.
01 FLAG-QT pic XX value 'QT'.
01 DELTA-LINE-1 pic X(1024) value all '-'.
01 DELTA-LINE-2 pic X(1024) value all '-'.
01 PTR-1 pic 9(5) value 0.
01 PTR-2 pic 9(5) value 0.
01 IDX-1 pic 9(5) value 0.
01 IDX-2 pic 9(5) value 0.
01 BYPASS-UT1-CTR pic 9(3) value 0.
01 BYPASS-UT2-CTR pic 9(3) value 0.
01 WORK-05 pic X(5) value SPACES.
01 WORK-LENGTH pic 9(5) value 0.
01 DELTA-MAX-ABEND.
05 FILLER pic X(10) value 'ABENDING, '.
05 FILLER pic X(24) value 'Not Equal count exceeds '.
05 FILLER pic X(22) value 'user-defined limit of '.
05 DELTA-MAXIMUM-X pic X(9) value '000000002'.
05 DELTA-MAXIMUM redefines DELTA-MAXIMUM-X pic 9(9).
05 FILLER pic X(19) value ', ABEND process is '.
05 DELTA-PROCESS pic X(4) value 'EOF '.
01 IFNECODE-GROUP.
05 IFNECODE-VALUE pic 9(4) value 0016.
01 YES-YES pic XX value 'YY'.
01 N-BYTE pic X value 'N'.
01 Y-BYTE pic X value 'Y'.
01 GROUP-DELIMITER pic X value 'Y'.
01 LEN-UT1 pic 9(5) value 128.
01 POS-UT1 pic 9(5) value 1.
01 LEN-UT2 pic 9(5) value 128.
01 POS-UT2 pic 9(5) value 1.
01 LEN-1 pic 9(5) value 128.
01 POS-1 pic 9(5) value 1.
01 LEN-2 pic 9(5) value 128.
01 POS-2 pic 9(5) value 1.
01 D-LEN pic 9(5) value 128.
01 D-POS pic 9(5) value 1.
01 W-LEN pic 9(5) value 0.
01 W-POS pic 9(5) value 10.
01 DUMP-RECL-MAX-S pic X value 'N'.
01 DUMP-RECL-MAX pic 9(5) value 00000.
01 CONTINUE-FLAG pic X value 'Y'.
01 ASC-OR-EBC pic 9(3) comp value 0.
01 ASC-OR-EBC-R redefines ASC-OR-EBC.
05 ASC-A pic X.
05 EBC-A pic X.
* Header row for positional indicator...
01 DUMP-H10.
05 FILLER pic X(5) value '....:'.
05 POS-NO pic 9(5) value 10.
05 FILLER pic X(10) value '....:.....'.
01 DUMP-W10.
05 FILLER pic X(5) value '....:'.
05 W10-POS-NO pic X(5) value '00000'.
05 FILLER pic X(10) value '....:.....'.
01 DUMP-HEADER pic X(1024) value all '.'.
01 D-P1 pic 9(5) value 0.
01 WK-1 pic 9(5) value 0.
01 WK-2 pic 9(5) value 0.
01 RECORD-HEADER.
05 RECORD-ID pic X(8) value 'REPORT01'.
05 filler pic X(2) value '..'.
05 REC-NUMBER pic 9(9) value 0.
05 filler pic X value '('.
05 RECORD-POS pic 9(5) value 0.
05 filler pic X value ':'.
05 RECORD-LEN pic 9(5) value 0.
05 filler pic X(2) value ') '.
05 REC-CTYPE pic X(10) value 'UNKNOWN '.
05 filler pic X(2) value SPACES.
05 REC-CMODE pic X(10) value 'UNKNOWN '.
01 SYSLOG-OUTPUT pic X(4) value 'OUT1'.
01 INFO-STATEMENT.
05 INFO-SHORT.
10 INFO-ID pic X(8) value 'Starting'.
10 filler pic X(4) value ' - '.
10 INFO-34 pic X(34)
value 'Compare-133, 2-133 and OMIT-Bypass'.
05 filler pic X(33)
value ' http://www.SimoTime.com'.
01 UT1-MISSING.
05 filler pic X(5) value 'This '.
05 filler pic X(31)
value 'record is MISSING from REPORT01'.
05 filler pic X(7) value ' - the '.
05 filler pic X(29)
value 'record is PRESENT in REPORT02'.
01 UT2-MISSING.
05 filler pic X(5) value 'This '.
05 filler pic X(29)
value 'record is PRESENT in REPORT01'.
05 filler pic X(7) value ' - the '.
05 filler pic X(31)
value 'record is MISSING from REPORT02'.
01 REPORT01-TOTAL.
05 REPORT01-RDR pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 filler pic X(25) value 'Record count for REPORT01'.
01 REPORT02-TOTAL.
05 REPORT02-RDR pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 filler pic X(25) value 'Record count for REPORT02'.
01 REPORT01-OMIT.
05 REPORT01-OMT pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 filler pic X(25) value 'Bypass count for REPORT01'.
01 REPORT02-OMIT.
05 REPORT02-OMT pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 filler pic X(25) value 'Bypass count for REPORT02'.
01 COMPARE-NE-TOTAL.
05 COMPARE-NE pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 COMPARE-TAG.
10 filler pic X(25) value 'NOT Equal count for compa'.
10 filler pic X(25) value 're of existing records '.
01 COMPACT-NE-TOTAL.
05 COMPACT-NE pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 COMPACT-TAG.
10 filler pic X(25) value 'NOT Equal count for compa'.
10 filler pic X(25) value 'ct of existing records '.
01 COMPARE-EQ-TOTAL.
05 COMPARE-EQ pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 filler pic X(25) value 'Number of matching record'.
05 filler pic X(25) value ' pairs for Compare Task '.
01 COMPACT-EQ-TOTAL.
05 COMPACT-EQ pic 9(9) value 0.
05 filler pic X(3) value ' - '.
05 filler pic X(25) value 'Number of matching record'.
05 filler pic X(25) value ' pairs for Compact Task '.
01 FORMAT-TYPE pic X value 'B'.
COPY PASSHEX4.
COPY PASSLOGS.
COPY PAENVARS.
*****************************************************************
PROCEDURE DIVISION.
perform JOB-STARTING
perform
until COMPARE-STATUS = 'QT'
or REPORT01-STATUS not = '00'
or REPORT02-STATUS not = '00'
if READ-1 = 'Y'
perform REPORT01-READ
end-if
if READ-2 = 'Y'
perform REPORT02-READ
end-if
if REPORT01-STATUS = '00'
and REPORT02-STATUS = '00'
move 'EQ' to COMPARE-STATUS
move 'N' to DUMP-STATUS
move all '-' to DELTA-LINE-1
move all '-' to DELTA-LINE-2
if FF-03 = '1'
perform CONDITIONAL-PROCESSING
end-if
if KEY-ACTIVE = 'Y'
and COMPARE-STATUS = FLAG-EQ
perform COMPARE-KEYS
end-if
if COMPARE-STATUS = FLAG-EQ
perform COMPARE-RECORDS
end-if
if DUMP-STATUS = 'Y'
if GROUP-DELIMITER = 'Y'
perform DUMP-ASTERISK-ONE
end-if
add DLEN-UT1 to ZERO giving D-LEN
if DUMP-RPI = 'Y'
perform DUMP-POSITION-INDICATOR
end-if
perform DUMP-PRIMARY-RECORD
perform DUMP-POSITION-DIFFERENCES-1
perform DUMP-SECONDARY-RECORD
perform DUMP-POSITION-DIFFERENCES-2
add DLEN-UT2 to ZERO giving D-LEN
move 'N' to DUMP-STATUS
end-if
if COMPARE-STATUS = FLAG-NE
add 1 to COMPARE-NE
end-if
else
move 'NE' to COMPARE-STATUS
end-if
if COMPARE-STATUS = 'EQ'
add 1 to COMPARE-EQ
end-if
if DELTA-PROCESS = 'QUIT'
and COMPARE-NE > DELTA-MAXIMUM
perform JOB-FINISHED
move DELTA-MAX-ABEND to MESSAGE-TEXT
perform Z-ABEND-PROGRAM
end-if
if DELTA-PROCESS = 'EOF '
and COMPARE-NE > DELTA-MAXIMUM
move DELTA-MAX-ABEND to MESSAGE-TEXT
perform Z-DISPLAY-TO-CONSOLE
move 'QT' to COMPARE-STATUS
end-if
end-perform
perform JOB-FINISHED
GOBACK.
*****************************************************************
COMPARE-RECORDS.
* Physical Comparison with NE Output of ENABLED
move 'COMPARISON' to REC-CTYPE
move 'PHYSICAL ' to REC-CMODE
if REPORT01-REC(00002:00132) not = REPORT02-REC(00002:00132)
move FLAG-NE to COMPARE-STATUS
add 1 to COMPARE-NE
move 'Y' to DUMP-STATUS
end-if
if DUMP-DET = 'Y'
add 00002 to ZERO giving POS-UT1
add 00002 to ZERO giving POS-UT2
add 00132 to ZERO giving LEN-UT1
add 00132 to ZERO giving LEN-UT2
add 00132 to ZERO giving PASSHEX4-LENGTH
perform CALC-DELTA-FOR-NE-EQ-NO
end-if
exit.
*****************************************************************
COMPARE-KEYS.
move YES-YES to READ-FLAGS
if REPORT01-REC(K-PS-1:K-LN-1)
< REPORT02-REC(K-PS-2:K-LN-2)
move N-BYTE to READ-2
move FLAG-NE to COMPARE-STATUS
if COMPARE-NE < DELTA-MAXIMUM
and DUMP-DET-GRP = 'YNE'
perform DUMP-SECONDARY-MISSING
end-if
end-if
if REPORT01-REC(K-PS-1:K-LN-1)
> REPORT02-REC(K-PS-2:K-LN-2)
move N-BYTE to READ-1
move FLAG-NE to COMPARE-STATUS
if COMPARE-NE < DELTA-MAXIMUM
and DUMP-DET-GRP = 'YNE'
perform DUMP-PRIMARY-MISSING
end-if
end-if
exit.
*****************************************************************
CONDITIONAL-PROCESSING.
move 'NN' to READ-FLAGS
if BYPASS-UT1-CTR > ZERO
move 'BP' to COMPARE-STATUS
move 'Y' to READ-1
subtract 1 from BYPASS-UT1-CTR
end-if
if BYPASS-UT2-CTR > ZERO
move 'BP' to COMPARE-STATUS
move 'Y' to READ-2
subtract 1 from BYPASS-UT2-CTR
end-if
if REPORT01-REC(00002:00132) = SPACES
move 'BP' to COMPARE-STATUS
move 'Y' to READ-1
add 1 to REPORT01-OMT
end-if
if REPORT01-REC(00001:00001) = '1'
move 'BP' to COMPARE-STATUS
move 'Y' to READ-1
add 1 to REPORT01-OMT
add 00001 to ZERO giving BYPASS-UT1-CTR
end-if
if REPORT02-REC(00002:00132) = SPACES
move 'BP' to COMPARE-STATUS
move 'Y' to READ-2
add 1 to REPORT02-OMT
end-if
if REPORT02-REC(00001:00001) = '1'
move 'BP' to COMPARE-STATUS
move 'Y' to READ-2
add 1 to REPORT02-OMT
add 00001 to ZERO giving BYPASS-UT2-CTR
end-if
if READ-FLAGS = 'NN'
move 'YY' to READ-FLAGS
end-if
exit.
*****************************************************************
CALC-DELTA-FOR-NE-EQ-NO.
add POS-UT1 to ZERO giving PTR-1
add POS-UT2 to ZERO giving PTR-2
perform until PTR-1 > POS-UT1 + LEN-UT1 - 1
or PTR-2 > POS-UT2 + LEN-UT2 - 1
if REPORT01-REC(PTR-1:1)
= REPORT02-REC(PTR-2:1)
move '=' to DELTA-LINE-1(PTR-1:1)
move '=' to DELTA-LINE-2(PTR-2:1)
else
move '#' to DELTA-LINE-1(PTR-1:1)
move '#' to DELTA-LINE-2(PTR-2:1)
end-if
add 1 to PTR-1
add 1 to PTR-2
end-perform
exit.
*****************************************************************
DUMP-TO-LOG.
* HexDump...
* Dump DD Name, Record-Number, (position,length)
move RECORD-HEADER to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
* DUMP Record Position Indicator
* if DUMP-RPI = 'Y'
* perform DUMP-POSITION-INDICATOR
* end-if
if DUMP-ASC = 'Y'
move PASSHEX4-ASCII(1:D-LEN) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
if DUMP-HEX = 'Y'
move PASSHEX4-UPPER(1:D-LEN) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move PASSHEX4-LOWER(1:D-LEN) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
if DUMP-EBC = 'Y'
move PASSHEX4-EBCDIC(1:D-LEN) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
exit.
*****************************************************************
* Build the position header row...
*****************************************************************
DUMP-ASTERISK-ONE.
move SPACES to SIMOLOGS-MESSAGE
move '*' to SIMOLOGS-MESSAGE(1:1)
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
exit.
*****************************************************************
DUMP-POSITION-INDICATOR.
add 10 to ZERO giving POS-NO
subtract 1 from D-POS giving WK-1
divide 10 into WK-1 giving WK-1 remainder WK-2
add 1 to WK-2
perform varying D-P1 from 1 by 10 until D-P1 > 1020
move DUMP-H10 to DUMP-W10
inspect W10-POS-NO replacing leading ZEROES by '.'
move DUMP-W10(WK-2:10) to DUMP-HEADER(D-P1:10)
add 10 to POS-NO
end-perform
move DUMP-HEADER(1:D-LEN) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
exit.
*****************************************************************
DUMP-PRIMARY-MISSING.
if GROUP-DELIMITER = 'Y'
move SPACES to SIMOLOGS-MESSAGE
move all '*' to SIMOLOGS-MESSAGE(1:79)
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
add DPOS-UT1 to ZERO giving RECORD-POS
add DLEN-UT1 to ZERO giving RECORD-LEN
add DPOS-UT1 to ZERO giving D-POS
add DLEN-UT1 to ZERO giving D-LEN
* Present in REPORT02, missing from REPORT01...
move UT1-MISSING to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
add DLEN-UT2 to ZERO giving D-LEN
if DUMP-RPI = 'Y'
perform DUMP-POSITION-INDICATOR
end-if
perform DUMP-SECONDARY-RECORD
move SPACES to DELTA-LINE-2
move all '#' to DELTA-LINE-2(1:DLEN-UT2)
perform DUMP-POSITION-DIFFERENCES-2
exit.
*****************************************************************
DUMP-PRIMARY-RECORD.
add DPOS-UT1 to ZERO giving RECORD-POS
add DLEN-UT1 to ZERO giving RECORD-LEN
add DPOS-UT1 to ZERO giving D-POS
add DLEN-UT1 to ZERO giving D-LEN
move 'REPORT01..' to RECORD-ID
add REPORT01-RDR to ZERO giving REC-NUMBER
move REPORT01-REC(D-POS:D-LEN) to PASSHEX4-SOURCE
call 'SIMOHEX4' using PASSHEX4-PASS-AREA
perform DUMP-TO-LOG
exit.
*****************************************************************
DUMP-SECONDARY-MISSING.
if GROUP-DELIMITER = 'Y'
move SPACES to SIMOLOGS-MESSAGE
move all '*' to SIMOLOGS-MESSAGE(1:79)
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
add DPOS-UT2 to ZERO giving RECORD-POS
add DLEN-UT2 to ZERO giving RECORD-LEN
add DPOS-UT2 to ZERO giving D-POS
add DLEN-UT2 to ZERO giving D-LEN
* Present in REPORT01, missing from REPORT02...
move UT2-MISSING to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
add DLEN-UT1 to ZERO giving D-LEN
if DUMP-RPI = 'Y'
perform DUMP-POSITION-INDICATOR
end-if
perform DUMP-PRIMARY-RECORD
move SPACES to DELTA-LINE-1
move all '#' to DELTA-LINE-1(1:DLEN-UT1)
perform DUMP-POSITION-DIFFERENCES-1
exit.
*****************************************************************
DUMP-SECONDARY-RECORD.
move SPACES to PASSHEX4-SOURCE
add DPOS-UT2 to ZERO giving RECORD-POS
add DLEN-UT2 to ZERO giving RECORD-LEN
add DPOS-UT2 to ZERO giving D-POS
add DLEN-UT2 to ZERO giving D-LEN
move 'REPORT02..' to RECORD-ID
add REPORT02-RDR to ZERO giving REC-NUMBER
move REPORT02-REC(D-POS:D-LEN) to PASSHEX4-SOURCE
call 'SIMOHEX4' using PASSHEX4-PASS-AREA
perform DUMP-TO-LOG
exit.
*****************************************************************
DUMP-POSITION-DIFFERENCES-1.
if DUMP-RECL-MAX-S = 'Y'
and DUMP-RECL-MAX < REPORT01-LRECL
add DUMP-RECL-MAX to ZERO giving WORK-LENGTH
else
add REPORT01-LRECL to ZERO giving WORK-LENGTH
end-if
move DELTA-LINE-1(1:DLEN-UT1) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
exit.
*****************************************************************
DUMP-POSITION-DIFFERENCES-2.
if DUMP-RECL-MAX-S = 'Y'
and DUMP-RECL-MAX < REPORT02-LRECL
add DUMP-RECL-MAX to ZERO giving WORK-LENGTH
else
add REPORT02-LRECL to ZERO giving WORK-LENGTH
end-if
move DELTA-LINE-2(1:DLEN-UT2) to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
exit.
*****************************************************************
JOB-FINISHED.
if REPORT01-STATUS = '00'
and DELTA-PROCESS = 'EOF '
perform until REPORT01-STATUS not = '00'
perform REPORT01-READ
add 1 to COMPARE-NE
end-perform
end-if
if REPORT02-STATUS = '00'
and DELTA-PROCESS = 'EOF '
perform until REPORT02-STATUS not = '00'
perform REPORT02-READ
add 1 to COMPARE-NE
end-perform
end-if
perform REPORT02-CLOSE
perform REPORT01-CLOSE
if GROUP-DELIMITER = 'Y'
move SPACES to SIMOLOGS-MESSAGE
move all '*' to SIMOLOGS-MESSAGE(1:79)
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
move 'Conclude' to INFO-ID
move INFO-SHORT to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move 'Finished' to INFO-ID
move REPORT01-TOTAL to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
if REPORT01-OMT > ZERO
move REPORT01-OMIT to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
move REPORT02-TOTAL to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
if REPORT02-OMT > ZERO
move REPORT02-OMIT to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
if REPORT01-RDR not = REPORT02-RDR
move 'WARNING! - Record counts are not equal'
to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move 'ABENDING' to INFO-ID
end-if
if FF-01 = '1'
if COMPARE-NE = 0
inspect COMPARE-TAG
replacing first ' of existing records '
by ' is ZERO '
else
move 'ABENDING' to INFO-ID
end-if
move COMPARE-NE-TOTAL to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move COMPARE-EQ-TOTAL to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
if FF-02 = '1'
if COMPACT-NE = 0
inspect COMPACT-TAG
replacing first ' of existing records '
by ' is ZERO '
else
move 'ABENDING' to INFO-ID
end-if
move COMPACT-NE-TOTAL to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
end-if
if REPORT01-EOF not = 'Y'
or REPORT02-EOF not = 'Y'
move 'ABENDING' to INFO-ID
end-if
move INFO-STATEMENT to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move INFO-SHORT to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
perform Z-THANK-YOU.
if COMPARE-NE > 0
or REPORT01-RDR not = REPORT02-RDR
add IFNECODE-VALUE to ZERO giving RETURN-CODE
end-if
exit.
*****************************************************************
JOB-STARTING.
perform Z-POST-COPYRIGHT
perform Z-DETERMINE-ENVIRONMENT
perform REPORT01-OPEN
perform REPORT02-OPEN
move 'Y' to READ-1
move 'Y' to READ-2
if DELTA-MAXIMUM not numeric
add 100 to ZERO giving DELTA-MAXIMUM
end-if
if K-PS-1 > 0
and K-PS-2 > 0
and K-LN-1 > 0
and K-LN-2 > 0
move 'Y' to KEY-ACTIVE
move 'Key control is ENABLED...'
to MESSAGE-TEXT
else
move 'N' to KEY-ACTIVE
move 'Key control is NOT enabled...'
to MESSAGE-TEXT
end-if
perform Z-DISPLAY-MESSAGE-TEXT
move 'DUMP' to PASSHEX4-REQUEST
add 128 to ZERO giving PASSHEX4-LENGTH
move SYSLOG-OUTPUT to SIMOLOGS-REQUEST
move SPACES to SIMOLOGS-MESSAGE
move all '*' to SIMOLOGS-MESSAGE(1:79)
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move SIM-TITLE to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move SIM-COPYRIGHT to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move all '*' to SIMOLOGS-MESSAGE(1:79)
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
move INFO-STATEMENT to SIMOLOGS-MESSAGE
call 'SIMOLOGS' using SIMOLOGS-PASS-AREA
exit.
*****************************************************************
* I/O Routines for the Primary File... *
*****************************************************************
REPORT01-CLOSE.
add 8 to ZERO giving APPL-RESULT.
close REPORT01-FILE
if REPORT01-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
else
add 12 to ZERO giving APPL-RESULT
end-if
if APPL-AOK
CONTINUE
else
move 'CLOSE Failure with REPORT01' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move REPORT01-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
exit.
*---------------------------------------------------------------*
REPORT01-READ.
read REPORT01-FILE
if REPORT01-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
add 1 to REPORT01-RDR
else
if REPORT01-STATUS = '10'
add 16 to ZERO giving APPL-RESULT
else
add 12 to ZERO giving APPL-RESULT
end-if
end-if
if APPL-AOK
CONTINUE
else
if APPL-EOF
move 'Y' to REPORT01-EOF
else
move 'READ Failure with REPORT01' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move REPORT01-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
end-if
exit.
*---------------------------------------------------------------*
REPORT01-OPEN.
add 8 to ZERO giving APPL-RESULT.
open input REPORT01-FILE
if REPORT01-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
move 'O' to REPORT01-OPEN-FLAG
else
add 12 to ZERO giving APPL-RESULT
end-if
if APPL-AOK
CONTINUE
else
move 'OPEN Failure with REPORT01' to MESSAGE-TEXT
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
move REPORT01-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
exit.
*****************************************************************
* I/O Routines for the Secondary File... *
*****************************************************************
REPORT02-READ.
read REPORT02-FILE
if REPORT02-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
add 1 to REPORT02-RDR
else
if REPORT02-STATUS = '10'
add 16 to ZERO giving APPL-RESULT
else
add 12 to ZERO giving APPL-RESULT
end-if
end-if.
if APPL-AOK
CONTINUE
else
if APPL-EOF
move 'Y' to REPORT02-EOF
else
move 'READ Failure with REPORT02' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move REPORT02-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
end-if
exit.
*---------------------------------------------------------------*
REPORT02-OPEN.
add 8 to ZERO giving APPL-RESULT.
open input REPORT02-FILE
if REPORT02-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
move 'O' to REPORT02-OPEN-FLAG
else
add 12 to ZERO giving APPL-RESULT
end-if
if APPL-AOK
CONTINUE
else
move 'OPEN Failure with REPORT02' to MESSAGE-TEXT
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
move REPORT02-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
exit.
*---------------------------------------------------------------*
REPORT02-CLOSE.
add 8 to ZERO giving APPL-RESULT.
close REPORT02-FILE
if REPORT02-STATUS = '00'
subtract APPL-RESULT from APPL-RESULT
move 'C' to REPORT02-OPEN-FLAG
else
add 12 to ZERO giving APPL-RESULT
end-if
if APPL-AOK
CONTINUE
else
move 'CLOSE Failure with REPORT02' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
move REPORT02-STATUS to IO-STATUS
perform Z-DISPLAY-IO-STATUS
perform Z-ABEND-PROGRAM
end-if
exit.
*****************************************************************
* The following Z-ROUTINES provide administrative functions *
* for this program. *
*****************************************************************
* ABEND the program, post a message to the console and issue *
* a STOP RUN. *
*****************************************************************
Z-ABEND-PROGRAM.
if MESSAGE-TEXT not = SPACES
perform Z-DISPLAY-MESSAGE-TEXT
end-if
move 'PROGRAM-IS-ABENDING...' to MESSAGE-TEXT
perform Z-DISPLAY-MESSAGE-TEXT
add 12 to ZERO giving RETURN-CODE
STOP RUN.
* exit.
*****************************************************************
Z-DETERMINE-ENVIRONMENT.
add 16833 to ASC-OR-EBC
if ASC-A = 'A'
move 'Compiled for an ASCII environment...'
to MESSAGE-TEXT
else
if EBC-A = 'A'
move 'Compiled for an EBCDIC environment...'
to MESSAGE-TEXT
else
move 'Compiled for an UNKNOWN environment...'
to MESSAGE-TEXT
end-if
end-if
perform Z-DISPLAY-MESSAGE-TEXT
exit.
*****************************************************************
* Display to SYSOUT Device... *
*****************************************************************
Z-DISPLAY-MESSAGE-TEXT.
if MESSAGE-TEXT-2 = SPACES
display MESSAGE-BUFFER(1:79)
else
display MESSAGE-BUFFER
end-if
move all SPACES to MESSAGE-TEXT
exit.
*****************************************************************
* Display CONSOLE messages... *
*****************************************************************
Z-DISPLAY-TO-CONSOLE.
if MESSAGE-TEXT-2 = SPACES
display MESSAGE-BUFFER(1:79) upon console
else
display MESSAGE-BUFFER upon console
end-if
exit.
*****************************************************************
* Display the file status bytes. This routine will display as *
* four digits. If the full two byte file status is numeric it *
* will display as 00nn. If the 1st byte is a numeric nine (9) *
* the second byte will be treated as a binary number and will *
* display as 9nnn. *
*****************************************************************
Z-DISPLAY-IO-STATUS.
if IO-STATUS not NUMERIC
or IO-STAT1 = '9'
move IO-STAT1 to IO-STATUS-04(1:1)
subtract TWO-BYTES-BINARY from TWO-BYTES-BINARY
move IO-STAT2 to TWO-BYTES-RIGHT
add TWO-BYTES-BINARY to ZERO giving IO-STATUS-0403
move 'File Status is: nnnn' to MESSAGE-TEXT
move IO-STATUS-04 to MESSAGE-TEXT(17:4)
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
else
move '0000' to IO-STATUS-04
move IO-STATUS to IO-STATUS-04(3:2)
move 'File Status is: nnnn' to MESSAGE-TEXT
move IO-STATUS-04 to MESSAGE-TEXT(17:4)
perform Z-DISPLAY-TO-CONSOLE
perform Z-DISPLAY-MESSAGE-TEXT
end-if
exit.
*****************************************************************
Z-POST-COPYRIGHT.
move SIM-TITLE to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
move SIM-COPYRIGHT to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
exit.
*****************************************************************
Z-THANK-YOU.
move SIM-THANKS-01 to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
move SIM-THANKS-02 to MESSAGE-BUFFER
perform Z-DISPLAY-MESSAGE-TEXT
exit.
*****************************************************************
* This program was generated by SimoZAPS *
* A product of SimoTime Technologies *
* Our e-mail address is: helpdesk@simotime.com *
* Also, visit our Web Site at http://www.simotime.com *
* *
* Generation Date: 2020-06-25 Generation Time: 19:20:46:31 *
*****************************************************************
Secondary Functions
This section will focus on the items (process and programs) that do the generation and compilation of a data file compare programs.
Generate a Data File Compare Program
The SimoTime Utility Program for Data File Comparison runs on a Windows System with Micro Focus and will generate the COBOL source code for a program that will do a compare of two data files. The generation of the COBOL source code requires a Windows System with Micro Focus Studio or Micro Focus Server, version 6.0 or later. The generated COBOL source code may be compiled and executed on the following systems and will do the actual comparison of the two data files.
| ||||||||||
| System Possibilities for Generated Data File Comparison Programs |
Explore How to Generate a Data File Compare, Validate or Hex-Dump Program using simple specification statements in a Process Control File (PCF). This link to the User Guide includes the information necessary to create a Process Control File and generate the COBOL programs that will do a data file compare, accumulate summary totals with a record count or produce a Hex-Dump of records in a VSAM, KSDS based on a list of user-defined keys. The User Guide contains a list of the PCF statements that are used for the data file compare, validate or dump process.
The Process Control File, an Example
The following is the Process Control File (CPR13301.pcf) that will define the process and parameters required for generating a COBOL program that will compare two record sequential files (RSEQ) containing 133-byte, fixed length records.
*********************************************************************** * R133BP01.pcf - a Process Control File * * SimoTime Program Generation Technologies * * (C) Copyright 1987-2019 All Rights Reserved * * Web Site URL: http://www.simotime.com * * e-mail: helpdesk@simotime.com * *********************************************************************** * Generate a file compare program for 133 byte print reports. * &SIMOPREP call ../Env1BASE &USERPREP call USERCOMP &FUNCTION COMPARE &CONFORM IBM &USRMODEL SYSCOMP1.txt * *HEAD34 ....:....1....:....2....:....3.... &HEAD34 Compare-133, 2-133 and OMIT-Bypass &progid R133BPC1 &SYSUT1 name=REPORT01 org=Sequential recfm=FIXED rlen=133 &SYSUT2 name=REPORT02 org=Sequential recfm=FIXED rlen=133 * &UT1OMIT if pos 2 len 132 EQ SPACES &UT1OMIT if pos 1 len 1 EQ '1' bypass record +1 &UT2OMIT if pos 2 len 132 EQ SPACES &UT2OMIT if pos 1 len 1 EQ '1' bypass record +1 &COMPARE SYSUT1 pos 2 len 132 SYSUT2 pos 2 len 132 * &DELTAMAX 2 EOF &IFNECODE 0016 &DFORMAT ASC HEX EBC RPI &DISPLAY SYSOUT &SYSLOG ENABLED * &END
Delete & Define a Log File
If a NOT-Equal condition occurs during the compare process the out may be written to SYSOUT or a User-Defined log file. If the SYSLOG function is enabled then a SYSLOG file must exist prior to starting the compare process. The following two sub-sections of this document will describe and demonstrate the process to create (i.e. Delete and Define) a new SYSLOG file. The following is the Process Control File (CPR13301.pcf) that will define the process and parameters required for generating a COBOL program that will compare two record sequential file (RSEQ) containing 133-byte, fixed length records.
Create a SYSLOG File using a JCL Member
This JCL Member (SYSLOGV8.jcl) will Delete and Define a new SYSLOG file for a compare process that has the SYSLOG function enabled.
//SYSLOGV8 JOB SIMOTIME,CLASS=1,MSGCLASS=0,NOTIFY=CSIP1 //* ******************************************************************* //* SYSLOGV8.jcl - a JCL Member for Batch Job Processing * //* This JCL Member is provided by SimoTime Technologies * //* (C) Copyright 1987-2019 All Rights Reserved * //* Web Site URL: http://www.simotime.com * //* e-mail: helpdesk@simotime.com * //* ******************************************************************* //* //* Text - Create a new SYSLOG file. //* Author - SimoTime Technologies //* Date - January 24, 1996 //* //* ******************************************************************* //* Delete and Define a New SYSLOG file... //* // SET DDSYSLOG=SIMOTIME.SYSLOG.COMPARE //CRTLOGS1 EXEC SYSLOGP8 //
This JCL Procedure (SYSLOGP8.jcl) is used to do the actual Delete and Define of a new SYSLOG file for a compare process that has the SYSLOG function enabled.
//SYSLOGJ8 JOB SIMOTIME,CLASS=1,MSGCLASS=0,NOTIFY=CSIP1 //* ******************************************************************* //* This program is provided by SimoTime Technologies * //* (C) Copyright 1987-2019 All Rights Reserved * //* Web Site URL: http://www.simotime.com * //* e-mail: helpdesk@simotime.com * //* ******************************************************************* //* //* Text - Create a user SYSLOG file using IEBGENER. //* Author - SimoTime Technologies //* Date - January 24, 1996 //* //* The first job step (QSAMDELT) will delete a previously created //* file. The second job step (QCRTDIN1) will create a new file. //* //* This set of programs will run on a mainframe under MVS or on a //* Personal Computer with Windows and Micro Focus Mainframe Express. //* //* ******************************************************************* //* Step 1 of 2, Delete a previously created log file //* //QSAMDELT EXEC PGM=IEFBR14 //SYSUT2 DD DSN=SIMOTIME.UTIL.SYSLOG,DISP=(MOD,DELETE,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=V,LRECL=1055,DSORG=PS) //* //* ******************************************************************* //* Step 2 of 2, Create a new RSEQ file with variable length records //* //QCRTDIN1 EXEC PGM=IEBGENER //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //* :....1....:....2....:....3....:....4....:....5....:....6....:....7. //SYSUT1 DD * /* //SYSUT2 DD DSN=SIMOTIME.UTIL.SYSLOG, // DISP=(NEW,CATLG,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=V,LRECL=1055,DSORG=PS) //
Create a SYSLOG File using a CMD File
This Windows CMD file (SYSLOGW8.cmd) is used to do the actual Delete and Define of a new SYSLOG file for a compare process that has the SYSLOG function enabled.
@echo OFF
rem * *******************************************************************
rem * SYSLOGW8.cmd - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Delete and Define a New SYSLOG File.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * This set of programs will run in a Micro Focus Environment
rem *
rem * ************
rem * * SYSLOGW8 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************
rem * * SYSLOGC8 ******* SYSLOG *
rem * ********cbl* *******vrec*
rem * *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * *******************************************************************
rem * Step 1 of 2, Delete any previously created file...
rem *
set TskName=SYSLOGW8
call ..\ENV1BASE
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%TskName%"
call SimoNOTE "Starting TskName %TskName%"
:DeleteQSAM
call SimoNOTE "StepInfo Delete previously created file"
if exist %SYSLOG% del %SYSLOG%
rem *
rem * *******************************************************************
rem * Step 2 of 2, Define a New SYSLOG File...
rem *
call SimoNOTE "SYSLOG is %SYSLOG%"
run SYSLOGC8
rem *
if exist %SYSLOG% goto :EojAok
set JobStatus=0020
goto :EojNok
:EojAok
call SimoNOTE "Finished JobName %TskName%"
goto :End
:EojNok
call SimoNOTE "ABENDING JobName %TskName%"
:End
Ancillary Functionality
This section provides additional detail about the CMD files and programs that are used to support this set of sample programs.
Explore How to use Common or Shared Routines that perform repetitive tasks in a consistent manner. This link will provide information about setting common environment variables and many other utilitarian tasks.
Set the Environment
A command file (ENV1BASE.cmd) is called from other command files to set commonly used environment variables. This provides a single point of definition. The following is a listing of the contents of the command file.
@echo OFF
rem * *******************************************************************
rem * ENV1BASE.cmd - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2021 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Provide a single point to set common environment variables.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * Set the commonly used environment variables. This is used to provide
rem * a single point for managing the commonly used environment variables.
rem *
set SimoLIBR=c:\SimoLIBR
set BASELIB1=c:\SIMOSAM1\DEVL
set BASELIB8=c:\SimoSAM8
set BaseWIP1=c:\SimoSAM1\WIP1
set DATAZERO=c:\SIMODATA\DEVL\DATA\ZERO
set BASEAPP=%BaseLib1%
set BASESYS=%BaseLib1%\SYS1
set BASECAT=%BaseLib1%\DATA
set UMAPALIB=%BASECAT%\ASC1
set UMAPELIB=%BASECAT%\EBC1
set SYSLOG=%BASESYS%\LOGS\SYSLOG_USER.DAT
set SYSOUT=%BASEAPP%\LOGS\SYSOUT_SIMSAM01.txt
set SLZMSG=%BASEAPP%\LOGS\SLZMSG_USER.TXT
set PostNOTE=%BASEAPP%\LOGS\JOBLOG_SIMONOTE.TXT
set SIMONOTE=%BASEAPP%\LOGS\JOBLOG_SIMONOTE.txt
set USERPOST=%BASEAPP%\LOGS\ASSIGNED_USER_POST_FILE.txt
if [%1]==[] goto NO_POST
set SYSOUT=%BaseLib1%\LOGS\SYSOUT_%1.txt
call SIMONOTE "+ ENV1BASE *"
call SIMONOTE "+ ENV1BASE ********************************************************************%1"
call SIMONOTE "+ ENV1BASE is preparing the System Environment..."
call SIMONOTE "+ SIMOLIBR is %SIMOLIBR%"
call SIMONOTE "+ MIFOSYS1 is %MIFOSYS1%"
call SIMONOTE "+ BASELIB1 is %BASELIB1%"
:NO_POST
call SIMONOTE "+ SIMONOTE Job Log File is %SIMONOTE% "
rem *
set MQBASE=C:\Program Files\IBM\WebSphere MQ
rem *
rem * Set the location for the Apache-Tomcat Server...
set CATALINA_HOME=C:\APACHETC\apache-tomcat-7.0.52
rem set CATALINA_HOME=C:\Program Files (x86)\Java\jdk1.8.0_112
rem *
rem * Set the Environment for the Java Environment...
rem set JAVABASE=C:\APACHETC\apache-tomcat-7.0.52
set JAVABASE=C:\Program Files (x86)\Java\jdk1.8.0_112
set JAVASDK="%JAVABASE%\bin"
set JAVA_HOME=%JAVABASE%
set JRE_HOME=%JAVABASE%
set SIMOTCAT=%CATALINA_HOME%\webapps\simotcat
set SIMPACKS=%CATALINA_HOME%\webapps\simotcat\WEB-INF\classes\simpacks
rem *
rem * Set the environment for the Micro Focus technology...
set MIFOEDEV=C:\Program Files (x86)\Micro Focus\Enterprise Developer
set MIFOVCBL=C:\Program Files (x86)\Micro Focus\Visual COBOL Build Tools
set MIFOESTU=C:\Program Files (x86)\Micro Focus\Studio Enterprise Edition 6.0
set MIFOEMFE="C:\Program Files (x86)\Micro Focus\Mainframe Express"
rem *
rem * Large file support, performance tuning and record locking of the File Handler
set EXTFH=%BASESYS%\CONFIG\EXTFHBIG.CFG
rem *
rem * For IMS Support
set ES_IMSLIB=%BASEAPP%\IMSLIB
set ES_ACBLIB=%BASEAPP%\IMSLIB
rem *
rem * EZASOKETS Check EZASOKETS Enabled box or set ES_EZASOKET_SUPPORT=YES
set EZACONFG=BASESYS1\CONFIG\EZACONFG.dat
rem *
rem * Resource Allocation and Performance for SORT and non-Relational Data
rem set MFJSENGINE=SYNCSORT
set SORTSCHEME=1
set SORTSPACE=750000000
set TMP=C:\SORTWORK
rem *
set ES_ALLOC_OVERRIDE=%BASESYS%\CONFIG\CATMAPA1.cfg
rem * For CORE_ON_ERROR function, ABEND Dump
rem * set COBCONFIG_=%BASESYS%\CONFIG\diagnose.cfg
rem *
rem * Consolidated Trace Facility (CTF)
rem * set MFTRACE_CONFIG=%BASESYS%\CONFIG\ctf.cfg
rem * set MFTRACE_LOGS=c:\ctflogs
rem *
rem * For Job Restart, ABEND Recovery
set MF_UCC11=Y
set ES_JES_RESTART=Y
rem *
rem * Set environment for MFBSI (Micro Focus Batch Scheduling Interface)
set ES_EMP_EXIT_1=mfbsiemx
set MFBSI_DIR=%BASESYS%\LOGS\%JESSERVERNAME%
set MFBSIEOP_CMD=ENABLE
set MFBSIEOP_CSV=ENABLE
set MFBSIEOP_HTM=ENABLE
set MFBSIEOP_XML=ENABLE
rem *
rem * Set Behavior and Trace Flags for GETJOBDD
rem * Position=12345678/12345678
set JDDFLAGS=nnnWnnnn/YYnnnnnn
rem *
rem * If not already set then set the PATH for Micro Focus Directories
if "%SIMOPATH%" == "Y" goto JUMPPATH
if "%MIFOSYS1%" == "EDEV" goto JUMPEDEV
if "%MIFOSYS1%" == "VCBL" goto JUMPVCBL
if "%MIFOSYS1%" == "ESTU" goto JUMPESTU
if "%MIFOSYS1%" == "EMFE" goto JUMPEMFE
:JUMPEDEV
set path=%BASESYS%\LOADLIB;%MIFOEDEV%\bin;%JAVASDK%;%BASEAPP%\JAVA;%PATH%;
set CobCpy=%BASEAPP%\CobCpy1;%BASEAPP%\CobCpy2;%BASEAPP%\CobCpy6;%SimoLIBR%;%MIFOEDEV%\CPYLIB
set MIFOBASE=%MIFOEDEV%
goto JUMPPATH
:JUMPVCBL
set path=%MIFOVCBL%\bin;%MIFOVCBL%;%JAVASDK%;%BASEAPP%\JAVA;%PATH%;
set MIFOBASE=%MIFOVCBL%
goto JUMPPATH
:JUMPESTU
set MIFOBASE=%MIFOESTU%\Base
set MIFOBIN=%MIFOBASE%\bin
set path=%BASESYS%\LOADLIB;%MIFOBASE%;%MIFOBIN%;%JAVASDK%;%BASEAPP%\JAVA;%PATH%;
set CobCpy=%BASEAPP%\CobCpy1;%BASEAPP%\CobCpy2;%BASEAPP%\CobCpy6;%SimoLIBR%;%MIFOBASE%\SOURCE
goto JUMPPATH
:JUMPEMFE
set MIFOBASE=%MIFOEMFE%\Base
set MIFOBIN=%MIFOBASE%\bin
set path=%BASESYS%\LOADLIB;%MIFOBASE%;%MIFOBIN%;%JAVASDK%;%BASEAPP%\JAVA;%PATH%;
set CobCpy=%BASEAPP%\CobCpy1;%BASEAPP%\CobCpy2;%BASEAPP%\CobCpy6;%SimoLIBR%;%MIFOBASE%\SOURCE
goto JUMPPATH
rem *
:JUMPPATH
set SIMOPATH=Y
rem *
set MAINFRAME_FLOATING_POINT=true
set COBIDY=%BASEAPP%\COBIDY
set COBPATH=.;%BASEAPP%\LOADLIB;%BASEAPP%\LOADLIB\GNTS;%BASESYS%\LOADLIB;%SimoLIBR%
set LIBPATH=.;%BASEAPP%\LOADLIB;%BASEAPP%\LOADLIB\GNTS;%BASESYS%\LOADLIB;%SimoLIBR%
set TXDIR=%BASESYS%\LOADLIB;%MIFOBASE%
set CobCpy=%BASEAPP%\CobCpy1;%BASEAPP%\CobCpy2;%BASEAPP%\CobCpy6;%SimoLIBR%
rem *
set USERCLASS=%BASELIB1%\LOADLIB
set CLASSPATH=.
set CLASSPATH=%CLASSPATH%;%JAVABASE%
set CLASSPATH=%CLASSPATH%;%JAVABASE%\lib
set CLASSPATH=%CLASSPATH%;\%USERCLASS%\simpacks
set CLASSPATH=%CLASSPATH%;C:\APACHETC\apache-tomcat-7.0.52\webapps\simotcat\WEB-INF\classes
set CLASSPATH=%CLASSPATH%;C:\APACHETC\apache-tomcat-7.0.52\webapps\simotcat\WEB-INF\classes\simpacks
rem *
if "%MIFOSYS1%" == "ESTU" set CLASSPATH=%CLASSPATH%;%MIFOBIN%
if "%MIFOSYS1%" == "EDEV" set CLASSPATH=%CLASSPATH%;%MIFOEDEV%
if "%MIFOSYS1%" == "VCBL" set CLASSPATH=%CLASSPATH%;%MIFOVCBL%
if "%MIFOSYS1%" == "VCBL" set CLASSPATH=%CLASSPATH%;%MIFOVCBL%\bin\mfcobol.jar
rem *
set JobStatus=0000
call SIMONOTE "+ ENV1BASE is returning to caller"
Display and Log Messages
A command file (SIMONOTE.cmd) is called from other command files to display and write messages to a log file. The following is a listing of the contents of the command file.
@echo OFF rem * ******************************************************************* rem * SIMONOTE.cmd - a Windows Command File * rem * This program is provided by SimoTime Technologies * rem * (C) Copyright 1987-2019 All Rights Reserved * rem * Web Site URL: http://www.simotime.com * rem * e-mail: helpdesk@simotime.com * rem * ******************************************************************* rem * rem * Text - Display message on screen and write to a log file. rem * Author - SimoTime Technologies rem * rem * This script may be called from other scripts and expects a single rem * parameter enclosed in double quotes. The double quotes will be rem * removed. Before writing to the log file a date and time stamp rem * will be inserted in front of the message text. rem * rem * Note: The tilde (~) removes leading/trailing double-quotes. rem * if "%SimoNOTE%" == "" set SimoNOTE=c:\SimoLIBR\LOGS\SimoTime.LOG echo %date% %time% %~1>> %SimoNOTE% echo %~1
Create Test Files
This example uses three data files to demonstrate the basic functions of the data file compare process. the first two files are sequential files containing three records of identical content. The third file is different from the first two files and is used to shows the results when a NOT-Equal condition occurs.
Create Test Files using a JCL Member
This JCL Member (CPRS80J8.jcl) will create four test files that will be used by the Data File Compare program that was generated.
//CPRS80J8 JOB SIMOTIME,CLASS=1,MSGCLASS=0,NOTIFY=CSIP1 //* ******************************************************************* //* CPRS80J8.JCL - a JCL Member for Batch Job Processing * //* This JCL Member is provided by SimoTime Technologies * //* (C) Copyright 1987-2019 All Rights Reserved * //* Web Site URL: http://www.simotime.com * //* e-mail: helpdesk@simotime.com * //* ******************************************************************* //* //* Text - Create Sequential Data Sets on disk using IEBGENER. //* Author - SimoTime Technologies //* Date - January 24, 1996 //* //* The first job step (QSAMDELT) will delete any previously created //* file. The second job step (QCRTDIN1) will create a new file. //* //* The Steps 2-4 will create new sequential files. //* //* The last step will create a SYSLOG file. //* //* This set of programs will run on a mainframe under MVS or on a //* Personal Computer with Windows and Micro Focus Mainframe Express. //* //* ******************************************************************* //* Step 1 of 5, Delete any previously created files... //* //QSAMDELT EXEC PGM=IEFBR14 //CRTRS801 DD DSN=SIMOTIME.DATA.RS80TT01,DISP=(MOD,DELETE,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //CRTRS802 DD DSN=SIMOTIME.DATA.RS80TT02,DISP=(MOD,DELETE,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //CRTRS803 DD DSN=SIMOTIME.DATA.RS80TT03,DISP=(MOD,DELETE,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //SYSLOG DD DSN=SIMOTIME.SYSLOG.CPRS80D1,DISP=(MOD,DELETE,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //* //* ******************************************************************* //* Step 2 of 5, Create and populate a new QSAM file. This step will //* create a sequential file with three records. The //* length of the records is 80 bytes. //* //CRTRS801 EXEC PGM=IEBGENER //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //* :....1....:....2....:....3....:....4....:....5....:....6....:....7. //SYSUT1 DD * Record 001, Text String 001... Record 002, Text String 002... Record 003, Text String 003... /* //SYSUT2 DD DSN=SIMOTIME.DATA.RS80TT01, // DISP=(NEW,CATLG,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //* //* ******************************************************************* //* Step 3 of 5, Create and populate a new QSAM file. //* This step will create a sequential file with three records. The //* records. The length of the records is 80 bytes. //* This file contains the same records as the file created //* in the preceding job step. //* //CRTRS802 EXEC PGM=IEBGENER //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //* :....1....:....2....:....3....:....4....:....5....:....6....:....7. //SYSUT1 DD * Record 001, Text String 001... Record 002, Text String 002... Record 003, Text String 003... /* //SYSUT2 DD DSN=SIMOTIME.DATA.RS80TT02, // DISP=(NEW,CATLG,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //* //* ******************************************************************* //* Step 4 of 5, Create and populate a new QSAM file. //* This step will create a sequential file with three //* records. The length of the records is 80 bytes. //* This file contains similar records as the file created //* in the preceding job step. However, the content of the //* second record contains additional text. //* //CRTRS803 EXEC PGM=IEBGENER //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //* :....1....:....2....:....3....:....4....:....5....:....6....:....7. //SYSUT1 DD * Record 001, Text String 001... Record 002, Text String 002... Catch me... Record 003, Text String 003... /* //SYSUT2 DD DSN=SIMOTIME.DATA.RS80TT03, // DISP=(NEW,CATLG,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=FB,LRECL=80,DSORG=PS) //* //* ******************************************************************* //* Step 5 of 5, Create a new RSEQ file with variable length records //* //QCRTDIN1 EXEC PGM=IEBGENER //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //* :....1....:....2....:....3....:....4....:....5....:....6....:....7. //SYSUT1 DD * /* //SYSUT2 DD DSN=SIMOTIME.SYSLOG.CPRS80D1, // DISP=(NEW,CATLG,DELETE), // STORCLAS=MFI, // SPACE=(TRK,5), // DCB=(RECFM=V,LRECL=1055,DSORG=PS) //
Create Test Files using Windows CMD Files
This Windows CMD file (CRT133W8.cmd) will call four command files to create the test files.
@echo OFF
rem * *******************************************************************
rem * CRT133W8.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Create 133 byte print files for testing.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * The job will create the test files containing report-oriented data.
rem * The test files will be used to show some of the advanced functions
rem * of the SimoTime Compare technology.
rem *
rem * *******************************************************************
rem * Prepare the environment...
set JobName=CRT133W8
call ..\Env1BASE %JobName%
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
set SIMOGENS=BATCH
rem *
call SimoNOTE "*******************************************************%JobName%"
call SimoNOTE "Starting JobName %JobName% Date and Time stamps are different"
call SimoNOTE "Continue JobName %JobName% Create a Baseline test file"
call CRT133W1
call SimoNOTE "Continue JobName %JobName% Create a copy of the Baseline file"
call CRT133W2
call SimoNOTE "Continue JobName %JobName% Create a truncated copy of the Baseline file"
call CRT133W3
call SimoNOTE "Continue JobName %JobName% Create a modified copy of the Baseline file"
call CRT133W4
call SimoNOTE "Finished JobName %JobName% %JobName%"
:End
pause
Baseline, Primary Test File
This Windows CMD file (CRT133W1.cmd) will use the Windows ECHO Command to create the baseline ASCII/Text (or Line Sequential) file. The ASCII/Text file will then be converted to a sequential file that will be used to test the Data File Compare program that was generated.
@echo OFF
rem * *******************************************************************
rem * CRT133W1.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Create 133 byte print files for testing.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * The job will read an 80-byte file that contains REPORT
rem * information.
rem *
rem * The job will create three (3) test files containing REPORT-oriented
rem * information.
rem *
rem * ************
rem * * CRT133W1 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************
rem * * echo ******* RPT080T1 *
rem * ********win* *******lseq*
rem * *
rem * ************ ************ ************
rem * * GETLS080 ******* CV80ALAR ******* PUTRS080 * See Note-1
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * ************ ************ ************
rem * * RPT080D1 ******* RPT133C8 ******* RPT133D1 * See Note-2
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * Note-1: RPT080T1 will be mapped to GETLS080
rem * Note-1: GETLS080 will be mapped to RPT080D1
rem *
rem * *******************************************************************
rem * Prepare the environment...
set CmdName=CRT133W1
call ..\Env1BASE %CmdName%
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
rem *
rem * *******************************************************************
set RPT080T1=%BaseLib1%\DATA\TXT1\RPT080T1.TXT
call SimoNOTE "DataMake %RPT080T1% "
rem * ....:....1....:....2....:....3....:....4....:....5....:....6.
echo 1Report Identifier Primary Header 2010/01/05>%RPT080T1%
echo Page: 0001 Sub-Title Info 12:05:22pm>>%RPT080T1%
echo Left Data-01 Center Data 01 Right Data 01>>%RPT080T1%
echo Left Data-02 Center Data 02 Right Data 02>>%RPT080T1%
echo Left Data-03 Center Data 03 Right Data 03>>%RPT080T1%
echo Left Data-04 Center Data 04 Right Data 04>>%RPT080T1%
echo Left Data-05 Center Data 05 Right Data 05>>%RPT080T1%
echo 1Report Identifier Primary Header 2010/01/05>>%RPT080T1%
echo Page: 0002 Sub-Title Info 12:05:22pm>>%RPT080T1%
echo Left Data-21 Center Data 21 Right Data 21>>%RPT080T1%
echo Left Data-22 Center Data 22 Right Data 22>>%RPT080T1%
echo Left Data-23 Center Data 23 Right Data 23>>%RPT080T1%
echo Left Data-24 Center Data 24 Right Data 24>>%RPT080T1%
echo Left Data-25 Center Data 25 Right Data 25>>%RPT080T1%
rem *
rem * *******************************************************************
call SimoNOTE "Continue Convert LSEQ to RSEQ 80 Bytes"
set GETLS080=%RPT080T1%
set PUTRS080=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT080D1.DAT
call SimoNOTE "DataTake %GETLS080% "
call SimoNOTE "DataMake %PUTRS080% "
if exist %PUTRS080% del %PUTRS080%
run CV80ALAR
if not exist %PUTRS080% set JobStatus=0003
if not "%JobStatus%" == "0000" goto EojNok
rem *
rem * *******************************************************************
call SimoNOTE "Convert RSEQ 80 Bytes to RSEQ 133 bytes report file"
set RPT080D1=%PUTRS080%
set RPT133D1=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D1.DAT
call SimoNOTE "DataTake %RPT080D1% "
call SimoNOTE "DataMake %RPT133D1% "
if exist %RPT133D1% del %RPT133D1%
run RPT133C8
if exist %RPT133D1% goto :EojAok
set JobStatus=0020
goto :EojNok
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished CmdName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING CmdName %CmdName%, Job Status is %JobStatus%"
:End
if not "%SIMOGENS%" == "BATCH" pause
2nd Baseline, Different Data/Time Stamps
This Windows CMD file (CRT133W2.cmd) will use the Windows ECHO Command to create the logical copy of the baseline file. The user data will be identical. The date and time stamp in the header records will be different. The ASCII/Text file will then be converted to a sequential file that will be used to test the Data File Compare program that was generated.
@echo OFF
rem * *******************************************************************
rem * CRT133W2.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Create 133 byte print files for testing.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * The job will create three (3) test files containing REPORT-oriented
rem * information.
rem *
rem * ************
rem * * CRT133W2 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************
rem * * echo ******* RPT080T1 *
rem * ********win* *******lseq*
rem * *
rem * ************ ************ ************
rem * * GETLS080 ******* CV80ALAR ******* PUTRS080 * See Note-1
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * ************ ************ ************
rem * * RPT080D1 ******* RPT133C8 ******* RPT133D1 * See Note-2
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * Note-1: RPT080T1 will be mapped to GETLS080
rem * Note-1: GETLS080 will be mapped to RPT080D1
rem *
rem * *******************************************************************
rem * Prepare the environment...
set CmdName=CRT133W2
call ..\Env1BASE %CmdName%
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
rem *
rem * *******************************************************************
set RPT080T1=%BaseLib1%\DATA\TXT1\RPT080T2.TXT
call SimoNOTE "DataMake %RPT080T2% "
rem * ....:....1....:....2....:....3....:....4....:....5....:....6.
echo 1Report Identifier Primary Header 2010/02/14>%RPT080T1%
echo Page: 0001 Sub-Title Info 16:14:44pm>>%RPT080T1%
echo Left Data-01 Center Data 01 Right Data 01>>%RPT080T1%
echo Left Data-02 Center Data 02 Right Data 02>>%RPT080T1%
echo Left Data-03 Center Data 03 Right Data 03>>%RPT080T1%
echo Left Data-04 Center Data 04 Right Data 04>>%RPT080T1%
echo Left Data-05 Center Data 05 Right Data 05>>%RPT080T1%
echo 1Report Identifier Primary Header 2010/02/14>>%RPT080T1%
echo Page: 0002 Sub-Title Info 16:14:44pm>>%RPT080T1%
echo Left Data-21 Center Data 21 Right Data 21>>%RPT080T1%
echo Left Data-22 Center Data 22 Right Data 22>>%RPT080T1%
echo Left Data-23 Center Data 23 Right Data 23>>%RPT080T1%
echo Left Data-24 Center Data 24 Right Data 24>>%RPT080T1%
echo Left Data-25 Center Data 25 Right Data 25>>%RPT080T1%
rem *
rem * *******************************************************************
call SimoNOTE "Continue Convert LSEQ to RSEQ 80 Bytes"
set GETLS080=%RPT080T1%
set PUTRS080=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT080D2.DAT
call SimoNOTE "DataTake %GETLS080% "
call SimoNOTE "DataMake %PUTRS080% "
if exist %PUTRS080% del %PUTRS080%
run CV80ALAR
if not exist %PUTRS080% set JobStatus=0003
if not "%JobStatus%" == "0000" goto EojNok
rem *
rem * *******************************************************************
call SimoNOTE "Convert RSEQ 80 Bytes to RSEQ 133 bytes report file"
set RPT080D1=%PUTRS080%
set RPT133D1=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D2.DAT
call SimoNOTE "DataTake %RPT080D1% "
call SimoNOTE "DataMake %RPT133D1% "
if exist %RPT133D1% del %RPT133D1%
run RPT133C8
if exist %RPT133D1% goto :EojAok
set JobStatus=0020
goto :EojNok
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished CmdName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING CmdName %CmdName%, Job Status is %JobStatus%"
:End
if not "%SIMOGENS%" == "BATCH" pause
Truncated Test File, Different Record Count
This Windows CMD file (CRT133W3.cmd) will use the Windows ECHO Command to create the truncated copy of the baseline file. The user data in the line items will be identical. The date and time stamp in the header records will be different. The ASCII/Text file will then be converted to a sequential file that will be used to test the Data File Compare program that was generated.
@echo OFF
rem * *******************************************************************
rem * CRT133W3.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Create 133 byte print files for testing.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * The job will read an 80-byte file that contains REPORT
rem * information.
rem *
rem * The job will create three (3) test files containing REPORT-oriented
rem * information.
rem *
rem * ************
rem * * CRT133W3 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************
rem * * echo ******* RPT080T1 *
rem * ********win* *******lseq*
rem * *
rem * ************ ************ ************
rem * * GETLS080 ******* CV80ALAR ******* PUTRS080 * See Note-1
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * ************ ************ ************
rem * * RPT080D1 ******* RPT133C8 ******* RPT133D1 * See Note-2
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * Note-1: RPT080T1 will be mapped to GETLS080
rem * Note-1: GETLS080 will be mapped to RPT080D1
rem *
rem * *******************************************************************
rem * Prepare the environment...
set CmdName=CRT133W3
call ..\Env1BASE %CmdName%
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
rem *
rem * *******************************************************************
set RPT080T1=%BaseLib1%\DATA\TXT1\RPT080T3.TXT
call SimoNOTE "DataMake %RPT080T1% "
rem * ....:....1....:....2....:....3....:....4....:....5....:....6.
echo 1Report Identifier Primary Header 2010/02/14>%RPT080T1%
echo Page: 0001 Sub-Title Info 16:14:44pm>>%RPT080T1%
echo Left Data-01 Center Data 01 Right Data 01>>%RPT080T1%
echo Left Data-02 Center Data 02 Right Data 02>>%RPT080T1%
echo Left Data-03 Center Data 03 Right Data 03>>%RPT080T1%
echo Left Data-04 Center Data 04 Right Data 04>>%RPT080T1%
echo Left Data-05 Center Data 05 Right Data 05>>%RPT080T1%
echo 1Report Identifier Primary Header 2010/02/14>>%RPT080T1%
echo Page: 0002 Sub-Title Info 16:14:44pm>>%RPT080T1%
echo Left Data-21 Center Data 21 Right Data 21>>%RPT080T1%
rem *
rem * *******************************************************************
call SimoNOTE "Continue Convert LSEQ to RSEQ 80 Bytes"
set GETLS080=%RPT080T1%
set PUTRS080=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT080D3.DAT
call SimoNOTE "DataTake %GETLS080% "
call SimoNOTE "DataMake %PUTRS080% "
if exist %PUTRS080% del %PUTRS080%
run CV80ALAR
if not exist %PUTRS080% set JobStatus=0003
if not "%JobStatus%" == "0000" goto EojNok
rem *
rem * *******************************************************************
call SimoNOTE "Convert RSEQ 80 Bytes to RSEQ 133 bytes report file"
set RPT080D1=%PUTRS080%
set RPT133D1=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D3.DAT
call SimoNOTE "DataTake %RPT080D1% "
call SimoNOTE "DataMake %RPT133D1% "
if exist %RPT133D1% del %RPT133D1%
run RPT133C8
if exist %RPT133D1% goto :EojAok
set JobStatus=0020
goto :EojNok
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished CmdName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING CmdName %CmdName%, Job Status is %JobStatus%"
:End
if not "%SIMOGENS%" == "BATCH" pause
Modified Test File, Different Record Content
This Windows CMD file (CRT133W4.cmd) will use the Windows ECHO Command to modified copy of the baseline file. The record content will have an embedded difference. The date and time stamp in the header records will be different. The ASCII/Text file will then be converted to a sequential file that will be used to test the Data File Compare program that was generated.
@echo OFF
rem * *******************************************************************
rem * CRT133W4.CMD - a Windows Command File *
rem * This program is provided by SimoTime Technologies *
rem * (C) Copyright 1987-2019 All Rights Reserved *
rem * Web Site URL: http://www.simotime.com *
rem * e-mail: helpdesk@simotime.com *
rem * *******************************************************************
rem *
rem * Text - Create 133 byte print files for testing.
rem * Author - SimoTime Technologies
rem * Date - January 24, 1996
rem *
rem * The job will create three (3) test files containing REPORT-oriented
rem * information.
rem *
rem * ************
rem * * CRT133W4 *
rem * ********cmd*
rem * *
rem * *
rem * ************ ************
rem * * echo ******* RPT080T1 *
rem * ********win* *******lseq*
rem * *
rem * ************ ************ ************
rem * * GETLS080 ******* CV80ALAR ******* PUTRS080 * See Note-1
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * ************ ************ ************
rem * * RPT080D1 ******* RPT133C8 ******* RPT133D1 * See Note-2
rem * *******lseq* ********cbl* *******rseq*
rem * *
rem * *
rem * ************
rem * * EOJ *
rem * ************
rem *
rem * Note-1: RPT080T1 will be mapped to GETLS080
rem * Note-1: GETLS080 will be mapped to RPT080D1
rem *
rem * *******************************************************************
rem * Prepare the environment...
set CmdName=CRT133W4
call ..\Env1BASE %CmdName%
if "%SYSLOG%" == "" set syslog=c:\SimoLIBR\LOGS\SimoTime.LOG
rem *
call SimoNOTE "*******************************************************%CmdName%"
call SimoNOTE "Starting CmdName %CmdName%"
rem *
rem * *******************************************************************
set RPT080T1=%BaseLib1%\DATA\TXT1\RPT080T4.TXT
call SimoNOTE "DataMake %RPT080T1% "
rem * ....:....1....:....2....:....3....:....4....:....5....:....6.
echo 1Report Identifier Primary Header 2010/02/14>%RPT080T1%
echo Page: 0001 Sub-Title Info 16:14:44pm>>%RPT080T1%
echo Left Data-01 Center Data 0l Right Data 01>>%RPT080T1%
echo Left Data-02 Center Data 02 Right Data 02>>%RPT080T1%
echo Left Data-03 Center Data 03 Right Data 03>>%RPT080T1%
echo Left Data-04 Center Data 04 Right Data 04>>%RPT080T1%
echo Left Data-05 Center Data 05 Right Data 05>>%RPT080T1%
echo 1Report Identifier Primary Header 2010/02/14>>%RPT080T1%
echo Page: 0002 Sub-Title Info 16:14:44pm>>%RPT080T1%
echo Left Data-21 Center Data 21 Right Data 21>>%RPT080T1%
echo Left Data-22 Center Data 22 Right Data 22>>%RPT080T1%
echo Left Data-23 Center Data 23 Right Data 23>>%RPT080T1%
echo Left Data-24 Center Data 24 Right Data 24>>%RPT080T1%
echo Left Data-25 Center Data 25 Right Data 25>>%RPT080T1%
rem *
rem * *******************************************************************
call SimoNOTE "Continue Convert LSEQ to RSEQ 80 Bytes"
set GETLS080=%RPT080T1%
set PUTRS080=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT080D4.DAT
call SimoNOTE "DataTake %GETLS080% "
call SimoNOTE "DataMake %PUTRS080% "
if exist %PUTRS080% del %PUTRS080%
run CV80ALAR
if not exist %PUTRS080% set JobStatus=0003
if not "%JobStatus%" == "0000" goto EojNok
rem *
rem * *******************************************************************
call SimoNOTE "Convert RSEQ 80 Bytes to RSEQ 133 bytes report file"
set RPT080D1=%PUTRS080%
set RPT133D1=%BaseLib1%\DATA\APPL\SIMOTIME.DATA.RPT133D4.DAT
call SimoNOTE "DataTake %RPT080D1% "
call SimoNOTE "DataMake %RPT133D1% "
if exist %RPT133D1% del %RPT133D1%
run RPT133C8
if exist %RPT133D1% goto :EojAok
set JobStatus=0020
goto :EojNok
rem *
rem * *******************************************************************
:EojAok
call SimoNOTE "Finished CmdName %CmdName%, Job Status is %JobStatus%"
goto :End
:EojNok
call SimoNOTE "ABENDING CmdName %CmdName%, Job Status is %JobStatus%"
:End
if not "%SIMOGENS%" == "BATCH" pause
Summary
The primary focus of this document is on the items (process and procedures) that do the actual data file compare. A secondary focus discusses items that are used to generate the compare program and prepare the environment for the compare tasks. This document may be used as a tutorial for new programmers or as a quick reference for experienced programmers.
In the world of programming there are many ways to solve a problem. This documentation and software were developed and tested on systems that are configured for a SIMOTIME environment based on the hardware, operating systems, user requirements and security requirements. Therefore, adjustments may be needed to execute the jobs and programs when transferred to a system of a different architecture or configuration.
SIMOTIME Services has experience in moving or sharing data or application processing across a variety of systems. For additional information about SIMOTIME Services or Technologies please contact us using the information in the Contact or Feedback section of this document.
Software Agreement and Disclaimer
Permission to use, copy, modify and distribute this software, documentation or training material for any purpose requires a fee to be paid to SimoTime Technologies. Once the fee is received by SimoTime the latest version of the software, documentation or training material will be delivered and a license will be granted for use within an enterprise, provided the SimoTime copyright notice appear on all copies of the software. The SimoTime name or Logo may not be used in any advertising or publicity pertaining to the use of the software without the written permission of SimoTime Technologies.
SimoTime Technologies makes no warranty or representations about the suitability of the software, documentation or learning material for any purpose. It is provided "AS IS" without any expressed or implied warranty, including the implied warranties of merchantability, fitness for a particular purpose and non-infringement. SimoTime Technologies shall not be liable for any direct, indirect, special or consequential damages resulting from the loss of use, data or projects, whether in an action of contract or tort, arising out of or in connection with the use or performance of this software, documentation or training material.
Downloads and Links
This section includes links to documents with additional information that are beyond the scope and purpose of this document. The first group of documents may be available from a local system or via an internet connection, the second group of documents will require an internet connection.
Note: A SimoTime License is required for the items to be made available on a local system or server.
Current Server or Internet Access
The following links may be to the current server or to the Internet.
Note: The latest versions of the SimoTime Documents and Program Suites are available on the Internet and may be accessed using the icon. If a user has a SimoTime Enterprise License the Documents and Program Suites may be available on a local server and accessed using the icon.
Explore the Principles of Data File Validation. This link includes guidelines for defining requirements and determining the scope of effort for a data validation effort. This effort includes a data file compare process, a technique for accumulating summary totals with a record count and a technique for reading a VSAM, KSDS and producing a hex-dump output based on a list of user-defined keys.
Explore How to Generate a Data File Compare, Validate or Hex-Dump Program using simple specification statements in a Process Control File (PCF). This link to the User Guide includes the information necessary to create a Process Control File and generate the COBOL programs that will do a data file compare, accumulate summary totals with a record count or produce a Hex-Dump of records in a VSAM, KSDS based on a list of user-defined keys. The User Guide contains a list of the PCF statements that are used for the data file compare, validate or dump process.
Explore An Enterprise System Model that describes and demonstrates how Applications that were running on a Mainframe System and non-relational data that was located on the Mainframe System were copied and deployed in a Microsoft Windows environment with Micro Focus Enterprise Server.
Explore the COBOL Connection for more examples of COBOL programming techniques and sample code.
Explore an Extended List of Software Technologies that are available for review and evaluation. The software technologies (or Z-Packs) provide individual programming examples, documentation and test data files in a single package. The Z-Packs are usually in zip format to reduce the amount of time to download.
Explore The ASCII and EBCDIC Translation Tables. These tables are provided for individuals that need to better understand the bit structures and differences of the encoding formats.
Explore The File Status Return Codes that are used to interpret the results of accessing VSAM data sets and/or QSAM files.
Internet Access Required
The following links will require an internet connection.
This suite of programs and documentation is available for download. Link to an Evaluation zPAK Option that includes the program members, documentation and control files.
A good place to start is The SimoTime Home Page for access to white papers, program examples and product information. This link requires an Internet Connection
Explore The Micro Focus Web Site for more information about products (including Micro Focus COBOL) and services available from Micro Focus. This link requires an Internet Connection.
Glossary of Terms
Explore the Glossary of Terms for a list of terms and definitions used in this suite of documents and white papers.
Comments or Feedback
This document was created and is maintained by SimoTime Technologies. If you have any questions, suggestions, comments or feedback please use the following contact information.
| 1. | Send an e-mail to our helpdesk. |
| 1.1. | helpdesk@simotime.com. |
| 2. | Our telephone numbers are as follows. |
| 2.1. | 1 415 763-9430 office-helpdesk |
| 2.2. | 1 415 827-7045 mobile |
We appreciate hearing from you.
Company Overview
SimoTime Technologies was founded in 1987 and is a privately owned company. We specialize in the creation and deployment of business applications using new or existing technologies and services. We have a team of individuals that understand the broad range of technologies being used in today's environments. Our customers include small businesses using Internet technologies to corporations using very large mainframe systems.
Quite often, to reach larger markets or provide a higher level of service to existing customers it requires the newer Internet technologies to work in a complementary manner with existing corporate mainframe systems. We specialize in preparing applications and the associated data that are currently residing on a single platform to be distributed across a variety of platforms.
Preparing the application programs will require the transfer of source members that will be compiled and deployed on the target platform. The data will need to be transferred between the systems and may need to be converted and validated at various stages within the process. SimoTime has the technology, services and experience to assist in the application and data management tasks involved with doing business in a multi-system environment.
Whether you want to use the Internet to expand into new market segments or as a delivery vehicle for existing business functions simply give us a call or check the web site at http://www.simotime.com
| Return-to-Top |
| Data File Compare of Two Report Files of 133 Byte Records |
| Copyright © 1987-2025 SimoTime Technologies and Services All Rights Reserved |
| When technology complements business |
| http://www.simotime.com |